WolfgangPodium™ provides desk top configurations that enable equipment to be mounted in low and reclining arrangements, positioning the user above their respective touch screens, speakers and display monitors. This allows him/her to-see-hear-and-be-seen™ by co-workers and supervisors in the greater work space.

The desk tops have multiple zones that are each independent and electrically height adjustable, for optimized sight lines and comfort preferences.

Suitable for 24 / 7 work environments.

Linear, Dual Zone and Height Adjustable

Linear, Dual Zone and Height Adjustable

R04015 - Linear, Dual Zone and Height Adjustable

click to expand
  • Linear, dual zone and height adjustable (or static)
  • Linear, triple zone and height adjustable (or static)
  • Constructed as a self supporting module that is (substantially) pre-assembled in the factory.
  • See Models & CADblocks for a matrix of configurations.
  • The Dual Zone configuration includes one (1) motorized monitor rack and one (1) motorized work deck.
  • The Triple Zone configuration includes two (2) motorized monitor racks and one (1) motorized work deck.
  • The motorized work deck is monolithic and available in variable configurations .
  • Each zone has 500+lbs of lifting capacity.
  • Each zone is connected with a cable chain.
  • The monitor rack structure can accommodate up to four (4) tiers of 24” monitors or two (2) tiers of 60” flat panels.
  • The Linak® lift system has a minimal standby power requirement of 0.1 watts.
  • Each zone is height adjustable enabling desk top components to be set at levels per the user’s stature (advantageous for 24/7 shift environments).
  • The vertical travel range is from 22” up to 45” (Profile A).
  • Touch screens and display monitors are mounted on multi pivot articulating arms enabling the desk top equipment to be configured (without tools) as a concave arc centered on the user.
  • The motorized work deck features a minimum one inch (1”) finger-safety gap all around.
  • There is extended foot space under the CPU enclosure.
  • The base bench is completed as a lower equipment enclosure suitable for small form factor CPUs and mini towers.
  • Available with universal-rack-mount chassis in variable sizes.
  • The modular base deck provides access to a lateral cable trough and a substantial floor interface area (the cable trough can potentially substitute for a sub floor system).
  • The lower equipment enclosure is ventilated for heat dissipation by natural convection. No electric fans required.
    The multi zone Series 7.0 design allows heated air to rise through the top of the lower equipment cabinet and pass unobstructed up and around the modular monitor racks.
  • Available with factory installed electric power, data cabling and associated devices (as specified).
  • Suitable for American and British standard electrical fittings.
  • Accessories range from LED task lights to personal storage modules.
  • Available as continuous linear or arced constructions (with angled connecting modules).
  • All models are available as Static (rather than height adjustable)
  • All models are made to order and open to cad/cam modifications.
  • Finishes: See standards or specify an alternate material and/or color.
  • See Support for assistance with project development.